MHT BARGAIN BIN
As I clean my barn I keep finding new & used products that we are letting go really inexpensively. Please take a look at the items below. If you’re interested in any of the items, email me, and I will get back to you with a final price and arrange for delivery. All payments are in the form of a donation to keep help MHT alive.
No international shipping, unless you use a US based parcel forwarder such as MYUS.com
NEW Sterling Power 12V Alternator Protection Device
Protects your alternator & sensitive electronics in the case of a disconnect event from a BMS controlled LiFePo4 battery. Below dealer cost!
9 in-stock
$65.00 –Includes Shipping to 48 contiguous states
NEW Balmar SG200 Bluetooth Dongle
Full warranty (Through Balmar)
Way Below Dealer cost!!
$37.00 Shipping Included (to 48 contiguous States)
NEW Balmar SG205 Bluetooth Battery Monitor
Full warranty (Through Balmar)
The easiest SoC monitor there is!
Way below cost!
4 in stock
$148.00 Shipping Included (to 48 contiguous States)
Email for more details
NEW – Balmar Temp Sensors
Full warranty (Through Balmar)
MC-TS-B (20′ long): 4 in-stock
Way Below Dealer cost!!
$35.00 Includes shipping to Contiguous US States
Amp-It 105-ER (new old stock)
I was cleaning out my barn and came across two of these 105A externally regulated alts. These are brand new, built from 100% Leece-Neville components. These fit many Caterpillar, Universal, Westerbeke & Perkins Engines, to name a few. Just add a Balmar, Wakespeed or Arco Zeus and you’re in business. A 6-Series 100A Balmar currently costs $750.00!This is only $350.00
105A – Leece-Neville – Externally Regulated
E-Coat Epoxy Paint
1″ or 2″ foot, a 2″ conversion kit is pre-installed
3/8″ belt billet machined pulley (not stamped steel)
Bi-Directional Fan
AC Tap to drive a diesel tach
A steal!
$350.00 (plus shipping)
NEW – Leece-Neville 8MR External Regulation kit
As of June 12, 2017 Compass Marine Inc. was notified that Leece-Neville had discontinued this external regulation kit. We spent an entire year tracking down every last bit of inventory, of these kits, and actually re-imported over 150 of them from Europe. We then talked Leece-Neville into doing one last production run for us before the machine was scrapped. This allowed Compass Marine Inc. to continue supplying these kits to our readers. The supply is dwindling Once these are gone they are gone forever.
Below our landed cost!!!
$67.00 + SHIPPING
PLUS
Heat-Shrink Crimp Tool Die Set – 22 to 8 ga
This die-set fits many crimp tools made in Taiwan such as Ancor.
Below our landed cost!!!
$23.00. Shipping Included (to 48 contiguous States)
NEW -Sterling / ProMariner Batt Charger Temp Sensor
These are brand new temp sensors for the Sterling Pro-Charge Ultra or Pro Mariner Pronautic-P battery chargers.
Way Below Dealer cost!!
$25.00 Shipping Included (to 48 contiguous States)
Sterling Power ProCharge Ultra 12V 50A
SORRY SOLD
Sterling Power ProCon VSR’s
Brand New In Box Full Sterling Warranty
This is Sterling Powers version of an ACR only the combine points can be custom programmed.
Best on-line Price = $88.40 & $103.00
80A Model = $65.00
160A model =80.00
Includes shipping to contiguous 48 States
Alternator Bracket For DIY Alternator Mounting
Specs:
1/4″ Thick steel
2 – 3/8″/M10 Pivot Bolt Holes
1 – 3/8″ X 1 9/16″ Slot
1 – 3/8″ X 2″ Slot
1 – M10-1.5 X 90mm Bolt
1 – M10-1.5 Nut
4 – M10 Flat Washers (Shims)
1 – M10 Lock Washer
2 3/8″ between mounting ears, fits 2″ foot alternator
6 1/2″ Long
2″ Wide
3 Left
$27.00 Shipping included to 48 contiguous states
Email for more details
Dual-V Pulley – Leece-Neville 8MR Alternators
Super RARE. Why? These were long ago discontinued so we had them custom machined.
5/8″ Bore with keyway
1/2″/ 13mm Belt Width
3″ OD
Grove Center Spacing .63″
SORRY SOLD OUT