MHT BARGAIN BIN

As I clean my shop I keep finding new & used products that we are letting go really inexpensively. Please take a look at the items below. If you’re interested in any of the items, email me and I will get back to you with a final price and arrange for delivery. All payments are in the form of a donation to keep help MHT alive.

No international shipping, unless you use a US based parcel forwarder such as MYUS.com

NEW Sterling Power 12VAlternator Protection Device

We also have a few 24V models !
Protects your alternator/sensitive electronics in the case of a disconnect event from a BMS controlled battery. Below dealer cost.

$65.00 –Includes Shipping to 48 contiguous states

Email for more details

NEW-Three-Bank Pro-Charge Ultra Battery Chargers

Way below wholesale cost! Full warranty through Sterling Power.

20A= (SOLD OUT)
30A  (SOLD OUT)
40A (SOLD OUT)
50A (SOLD OUT)
60A (SOLD OUT)

Shipping = Buyer Pays

Email for more details

NEW Balmar SG200 Battery Monitor
 Full warranty (Through Balmar)

The easiest SoC monitor there is!
Way below cost!
$150.00 Shipping Included (to 48 contiguous States)
Email for more details

NEW Balmar UAA – Alternator Adjuster Arm

Brand New

 $25.00 (Shipping Included to 48 contiguous states)
3 Left

NEW Balmar UBB 2 – For Yanmar Engines
 Full warranty (Through Balmar)

Only 1 left

These adjuster arms are specifically designed for Yanmar engines that have the offset arm…

Sorry Sold Out
$65…00 Shipping Included (to 48 contiguous States)
Email for more details

NEW Balmar SG200 Bluetooth Dongle
Full warranty (Through Balmar)

Way Below Dealer cost!!

$37.00 Shipping Included (to 48 contiguous States)

Email for more details

NEW – Balmar Temp Sensors
Full warranty (Through Balmar)

MC-TS-B (20′ long): 4 in-stock
MC-TS-A80 (80″ long) 2 in-stock

Way Below Dealer cost!!

$35.00 Includes shipping to Contiguous US States

Email for more details

OPEN BOX -Balmar ARS-5H Smart Regulator

In a gesture for good customer service we robbed the harness from an in-stock ARS-5H. Reg has never been used or installed but does not include the factory harness. Great to have a spare!

Sorry SOLD

$155.00 Shipping Included (to 48 contiguous States)

Email for more details

NEW -Sterling / ProMariner  Batt Charger Temp Sensor

These are brand new temp sensors for  the Sterling Pro-Charge Ultra or Pro Mariner Pronautic-P  battery chargers.

Way Below Dealer cost!!

$25.00 Shipping Included (to 48 contiguous States)

Email for more details

USED ITEM -Xantrex Echo Charger

This was used by a customer for 1 week. He quickly learned that these don’t work with LiFePo4 batteries . These are perfect for charging a lead acid starting battery though. Plenty of wire length left to re-terminate

A steal!

$65.00 Shipping Included (to 48 contiguous States) (Amazon Price $134.00)

Email for more details

USED ITEM – Mastervolt Batterymate 1603-IG

This customer installed this FET isolator thinking it was a “charger”.  This device is brand new other than some dust from sitting in our shop. This is Mastervolts version of the Victron Argofet. This is a very low volt drop three bank FET isolator capable of 160A… Perfect for LiFePo4 installs.

Sorry this item has been sold.

Email for more details

USED ITEM – Balmar Digital Duo Charger

This customer wanted a higher charge capacity than 30A so we installed a 60A DC to DC charger. He gave this to us for a discount on the new DC to DC. Best for charging a lead acid start battery. Unit works perfectly but does have some epoxy cracking.

A steal!

$50.00. Shipping Included (to 48 contiguous States) (Cheapest online Price $232.00)

Email for more details

Brand NEW – Sterling Power 12V 30A DC to DC Charger

Brand new in the box ready to go includes temp sensor.

Way below wholesale!

1  Left

$170.00. Shipping Included (to 48 contiguous States) (Amazon  Price $272.00)

Email for more details

NEW – Leece-Neville 8MR External Regulation kit

As of June 12, 2017 Compass Marine Inc. was notified that Leece-Neville had discontinued this external regulation kit. We spent an entire year  tracking down every last bit of inventory, of these kits, and actually re-imported over 150 of them from Europe. We then talked Leece-Neville into doing one last production run for us before the machine was scrapped. This allowed Compass Marine Inc. to continue supplying these kits to our readers. The supply is dwindling Once these are gone they are gone forever.

Below our landed cost!!!

$67.00. Shipping Included (to 48 contiguous States)

Email for more details

Heat-Shrink Crimp Tool Die Set – 22 to 8 ga

This die-set fits most ratcheting crimp tools made in Taiwan such as Ancor.

Below our landed cost!!!

$17.00. Shipping Included (to 48 contiguous States)

Email for more details